DOIT ESP32-DevKit-V1

Overview

DOIT ESP32 DevKit V1 is an entry-level development board based on the ESP32-WROOM-32 module. This board integrates complete Wi-Fi and Bluetooth Low Energy functions and exposes all GPIO pins on standard 2.54mm headers for easy prototyping.

Hardware

This board uses ESP32 chip revision 1.1. A blue LED is connected to GPIO2, and a BOOT button is connected to GPIO0. The board has a micro-USB connector for power supply and programming/debugging.

ESP32 Features

• Dual core Xtensa microprocessor (LX6), running at 160 or 240MHz
• 520KB of SRAM
• 802.11b/g/n/e/i
• Bluetooth v4.2 BR/EDR and BLE
• Various peripherals:
  • 12-bit ADC with up to 18 channels
  • 2x 8-bit DACs
  • 10x touch sensors
  • 4x SPI
  • 2x I2S
  • 2x I2C
  • 3x UART
  • SD/SDIO/MMC host
  • Slave (SDIO/SPI)
  • Ethernet MAC
  • CAN bus 2.0
  • IR (RX/TX)
  • Motor PWM
  • LED PWM with up to 16 channels
  • Hall effect sensor
  • Temperature sensor
• Cryptographic hardware acceleration (RNG, ECC, RSA, SHA-2, AES)
• 5uA deep sleep current

Asymmetric Multiprocessing (AMP)

Boards featuring the ESP32 and ESP32-S3 SoC allows 2 different applications to be executed. Due to its dual-core architecture, each core can be enabled to execute customized tasks in stand-alone mode and/or exchanging data over OpenAMP framework. See Inter-Processor Communication (IPC) folder as code reference.